Epson EMP-713 Quick Reference Manual page 4

Projecting
Pages 29,30 of Owner's
Manual
1 Connect the power cord to the projector.
Connect the power cord to an electrical outlet.
2
The indicator will light orange.
3
Turn on the power for the
input source.
In the case of a VCR, press the PLAY button.
4
Rotate the zoom lever to the central position to extend the lens.
5
Remove the lens cover.
Power
6
Press the to turn on the
projector's power.
If using the remote control, set
the R/C switch to the ON
position and then press the
Power
.
will start flashing green and
projection will start.
(Warm-up in progress)
4
5
Power
6
1
ON
Operation
indicator
2
3