About Your New Thermostat - Honeywell VisionPRO IAQ Operating Manual

Operating Manual

About your new thermostat

Your new thermostat is pre-programmed and ready to go. Just set the time
and day. Then check the settings below and change if needed:
1 Set clock......................................................................................See page 5
2 Select fan setting: Preset to Auto ............................................See page 6
3 Select system setting: Preset to Heat ....................................See page 7
4 Program schedules: Preset to energy-saving levels
while you're at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) ......................................................See pages 8-11
5 Set humification, dehumidification
& ventilation controls, if applicable....................................See pages 17-19
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 10-11).
2