GE WSLS1500J Service Manual page 70

Field Test
: Before weight sensing test is initiated, make sure that no water remains in the
Note
washer. If water is remaining in the washer, inaccurate data will be displayed, or the
test will not proceed. To pump out, repeatedly press START/PAUSE pad until S
appears in the display.
With no clothing in the tub, when placed in the HA test, the following occurs:
1) Weight sensing begins.
2) Weight sensing ends, only the appropriate load light stays lit, and the display
shows corresponding weight sensing data.
The load light will indicate load size. Adding additional dry clothing, (not water) will
decrease the data number as weight is increased. Data readouts are approximate:
Extra Small = 97 and higher,
Small = 89-96,
Medium = 82-88,
Large = 76-81,
Extra Large = 75 or lower.
If the Soak light remains lit, 100 will be added to the display number.
70
Copyright 2009