Part One - Corsair VENGEANCE K70 RGB Manual

LIGHTING
ASSIGNMENTS

PART ONE

LIGHTING OVERVIEW
(Continued)
Cloning a Start or End Light
You can clone the start or end point of a gradient to
the opposite end, to help create continuity in color and
luminance for the start and end of the lighting effect�
• Right-click the marker you want to clone, and
then click Clone to other end-point�
• In the lighting grid, a marker with the
same color and intensity will appear at the
opposite end�
Note: This function is only available with the start
and end lights of a gradient lighting effect�
Adjusting Lighting Brightness
In the Brightness field, click and drag the slider to
the brightness level you want, with 10 being the
brightest, and 0 being the dimmest�
Flipping a Lighting Effect
You can also flip a lighting effect horizontally,
effectively reversing the lighting�
• Beneath the lighting grid, click Flip�
CREATING A RIPPLE LIGHTING EFFECT
In the Corsair Gaming Software, in the Lighting menu,
1� Click New�
2� The Foreground Lighting Editor dialog box
appears� In the Name field, enter the name for
the lighting effect�
3� In the Notes field, enter any optional notes
you want to make about the lighting effect�
4� On the left side, click Ripple�
5� In the lighting grid, right-click, and then click
Add�
6� A start marker appears at the 0% position�
In the lighting grid, right-click, and then click
Add�
7� An end marker appears at the 100% position
and a color bar with two end markers appears
in the grid� You can add additional markers for
the ripple by repeating step 6� You can also
change the color of markers, or move them to
change intensity and duration�
C O R S A I R V E N G E A N C E K 7 0 R G B K E Y B O A R D M A N U A L
73