Operation
4. Operation
Control Panel
Description
Control Options
Programming
DMX Personality
-8-
Button
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or
<SET>
sets the currently selected value in to the
current function
Navigates upward through the menu list and
<UP>
increases the numeric value when in a
function
Navigates downward through the menu list
<DOWN>
and decreases the numeric value when in a
function
You can set the COLORado™ Ridge IP start address in the 001~512 DMX range. This
enables for the control of up to 46 units in the 11-channel TOUR personality.
Refer to the Menu Map on page 14 to learn how the menu options relate to each other.
The Menu Map has a Main Level and a variable number of programming levels for each
option.
To go to an option in the Main Level, press <MENU> repeatedly until the option shows on
the display. Press <SET> to select it. This will take you to the first programming level for
that option.
To select an option or value within the current programming level press <UP> or <DOWN>
until it shows on the display. Press <SET> to accept it. In this case, if there is another
programming level, you will see its first option. Otherwise, you will see the selected value.
To exit to the previous menu level, press <MENU>.
This setting enables the user to choose a particular DMX personality.
1. Go to PERS.
2. Select the desired personality (TOUR, ARC1, AR1.D, ARC3, AR3.D, AR3.S, or HSV).
• See the DMX Values section for the highest starting address you can select for
each personality.
• Make sure that the starting addresses on the various units do not overlap due to
the new personality setting. See the DMX Values section.
Function
COLORado™ Ridge IP User Manual Rev. 8