Regulatory Compliance Statements - Fujitsu SPARC Enterprise M3000 Safety And Compliance Manual

Your Fujitsu product is marked to indicate its compliance class:
• Federal Communications Commission (FCC) — USA
• Industry Canada Equipment Standard for Digital Equipment (ICES-003) — Canada
• Voluntary Control Council for Interference (VCCI) — Japan
• Bureau of Standards Metrology and Inspection (BSMI) — Taiwan
• China Compulsory Certification (CCC) — China
• State Committee of Russian Federation for Standardization and Metrology (GOST-R) — Russia
Korea Communications Commission (KCC) — Korea
•
Please read the appropriate section that corresponds to the marking on your Fujitsu product before attempting to install the
product.
FCC Class A Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if it is
not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required
to correct the interference at his own expense.
Modifications: Any modifications made to this device that are not approved by Fujitsu Limited may void the authority
granted to the user by the FCC to operate this equipment.

Regulatory Compliance Statements

3