Power Cord Connection - Fujitsu SPARC Enterprise M3000 Safety And Compliance Manual

SELV Compliance
Safety status of I/O connections comply to SELV
requirements.

Power Cord Connection

Caution – Fujitsu products are designed to
work with power systems having a grounded
neutral (grounded return for DC-powered
products). To reduce the risk of electric shock,
do not plug Fujitsu products into any other
type of power system. Contact your facilities
manager or a qualified electrician if you are
not sure what type of power is supplied to
your building.
Caution – Not all power cords have the same
current ratings. Do not use the power cord
provided with your equipment for any other
products or use. Household extension cords
do not have overload protection and are not
meant for use with computer systems. Do not
use household extension cords with your
Fujitsu product.
The following caution applies only to devices with a
Standby power switch:
Caution – The power switch of this product
functions as a standby type device only. The
power cord serves as the primary disconnect
device for the system. Be sure to plug the
power cord into a grounded power outlet that
is nearby the system and is readily accessible.
Do not connect the power cord when the
power supply has been removed from the
system chassis.
The following caution applies only to devices with multiple
power cords:
Caution – For products with multiple power
cords, all power cords must be disconnected
to completely remove power from the system.
10 SPARC Enterprise M3000 Server Safety and Compliance Guide • February 2012
Battery Warning
Caution – There is danger of explosion if
batteries are mishandled or incorrectly
replaced. On systems with replaceable
batteries, replace only with the same
manufacturer and type or equivalent type
recommended by the manufacturer per the
instructions provided in the product service
manual. Do not disassemble batteries or
attempt to recharge them outside the system.
Do not dispose of batteries in fire. Dispose of
batteries properly in accordance with the
manufacturer's instructions and local
regulations. Note that on Fujitsu motherboard
units, there is a lithium battery molded into
the real-time clock. These batteries are not
customer replaceable parts.
System Unit Cover
You must remove the cover of your Fujitsu computer
system unit to add cards or memory. Be sure to replace the
cover before powering on your computer system.
Caution – Do not operate Fujitsu products
without the cover in place. Failure to take this
precaution may result in personal injury and
system damage.