Usb Data Cable; Call; Phone; Enhancements - Nokia 6300b User Manual

S e t t i n g s

USB data cable

You can use the USB data cable to transfer data between the device and a compatible PC or a printer supporting PictBridge. You
can also use the USB data cable with Nokia PC Suite.
To activate the device for data transfer or image printing, connect the data cable. Confirm
mode." and select from the following options:
Nokia mode — to use the cable for PC Suite
•
Printing & media — to use the device with a PictBridge compatible printer or with your compatible PC
•
Data storage — to connect to a PC that does not have Nokia software and use the device as a data storage device
•
To change the USB mode, select

Call

Select Menu Settings
>
Call forwarding — to forward your incoming calls (network service). You may not be able to forward your calls if some call
•
restriction functions are active.
Voice clarity — Select
•
Anykey answer — Select
•
selection keys, or the end key.
Automatic redial — Select
•
1-touch dialing — Select
•
holding the corresponding number key.
Call waiting — Select
•
service). See "Answer or reject a call," p. 13.
Summary after call — Select
•
Send my caller ID — Select
•
setting agreed upon with your service provider, select
Outgoing call line — to select the phone line 1 or 2 for making calls if supported by your SIM card (network service)
•

Phone

Select Menu Settings
>
Language settings — To set the display language of your device, select
•
according to the information on the SIM card. To select the USIM card language, select
the voice playback, select
Security keyguard — To set the device to ask for the security code when you unlock the keyguard. Enter the security code,
•
and select On.
Automatic keyguard
•
and no function of the device has been used. Select On, and set the time.
Welcome note — to write the note that is shown when the device is switched on
•
Flight query — The device asks every time when it is switched on whether you want to use the flight profile. With the flight
•
profile, all radio connections are switched off. The flight profile should be used in areas sensitive to radio emissions.
Phone updates — to receive software updates from your service provider (network service). This option may not be available,
•
depending on your device.
Operator selection — Select
•
your area. With Manual
Confirm SIM actions —
•
Help text activation — to select whether the device shows help texts
•
Start-up tone — The device plays a tone when it is switched on.
•

Enhancements

This menu or the following options are shown only if the device is or has been connected to a compatible mobile enhancement.
Select Menu Settings
>
options:
Default profile — to select the profile that you want to be automatically activated when you connect to the selected
•
enhancement
Automatic answer — to set the device to answer an incoming call automatically after 5 seconds. If
•
is set to Beep once or Off, automatic answer is off.
Lights — to set the lights permanently On. Select
•
© 2007 Nokia. All rights reserved.
Menu Settings
>
Call and from the following options:
>
See "Security," p. 26.
Active to enhance speech intelligibility especially in noisy environments.
On to answer an incoming call by briefly pressing any key, except the power key, the left and right
On to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt.
On to dial the names and phone numbers assigned to the number keys 2 to 9 by pressing and
Activate to have the network notify you of an incoming call while you have a call in progress (network
On to briefly display the approximate duration after each call.
Yes to show your phone number to the person you are calling (network service). To use the
Phone and from the following options:
>
Recognition lang.. See "Enhanced voice dialing," p. 13.
— to lock the keypad automatically after a preset time delay when the device is in the standby mode
See "Software updates over the air," p. 26.
Automatic to set the device to automatically select one of the cellular networks available in
you can select a network that has a roaming agreement with your service provider.
See "SIM services," p. 36.
> Enhancements. Select an enhancement, and depending on the enhancement, from the following
Connectivity USB data cable
> >
Set by network.
Phone
Automatic to set the lights on for 15 seconds after a keypress.
25
"USB data cable connected. Select
and the desired USB mode.
language. Automatic selects the language
SIM language. To set a language for
Incoming call alert: