Packet Data; Data Transfer; Transfer Contact List; Data Transfer With A Compatible Device - Nokia 6300b User Manual

S e t t i n g s

Packet data

General packet radio service (GPRS) is a network service that allows mobile devices to send and receive data over an internet
protocol (IP)-based network.
To define how to use the service, select
the following options:
When needed — to set the packet data connection to established when an application needs it. The connection will be
•
closed when the application is terminated.
Always online — to set the device to automatically connect to a packet data network when you switch the device on.
•
You can connect the device using Bluetooth wireless technology or USB data cable connection to a compatible PC and use the
device as a modem to enable GPRS connectivity from the PC.
To define the settings for connections from your PC, select
settings Active access
>
point, enter a name to change the access point settings, and select OK. Select
(APN) to establish a connection to a network, and select OK.
Establish an internet connection by using your phone as a modem.
both on your PC and on your device, the PC settings are used.

Data transfer

Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile device), a compatible
PC, or a remote internet server (network service).
Your device allows data transfer with a compatible PC or another compatible device when using the device without a SIM card.

Transfer contact list

To copy or synchronize data from your device, the name of the device and the settings must be in the list of transfer contacts.
If you receive data from another device (for example, a compatible mobile device), the corresponding transfer contact is
automatically added to the list, using the contact data from the other device.
original items in the list.
To add a new transfer contact to the list (for example, a mobile device), select
transfer Options Add transfer contact
> >
the transfer type.
To edit the copy and synchronize settings, select a contact from the transfer contact list and
To delete a transfer contact, select it from the transfer contact list and

Data transfer with a compatible device

For synchronization use Bluetooth wireless technology or a cable connection. The other device must be activated for receiving
data.
To start data transfer, select
than Server sync or PC synchronization.
According to the settings, the selected data is copied or synchronized.

Synchronize from a PC

To synchronize data from calendar, notes, and contacts, install the Nokia PC Suite software of your device on a compatible PC.
Use Bluetooth wireless technology or a USB data cable to connect your device with the PC and start the synchronization from
the PC.

Synchronize from a server

To use a remote internet server, subscribe to a synchronization service. For more information and the settings required for this
service, contact your service provider. You may receive the settings as a configuration message.
service," p. 7.
1. To start the synchronization from your device, select
2. Depending on the settings, select
Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete.
© 2007 Nokia. All rights reserved.
Menu Settings
>
point, and activate the access point you want to use. Select
Phone synchronization
>
Menu Settings Connectivity
> >
Initializing synchronization
Connectivity Packet data
> >
Menu Settings Connectivity
> >
Packet data acc.
See "Nokia PC Suite," p. 36.
Server sync
Menu
or Phone
Options > Delete.
Data transfer
>
Menu Settings Connectivity
> >
or Initializing
24
Packet data conn.
>
Packet data
>
Edit active access pt.
pt., enter the access point name
If you have set the settings
and PC synchronization
Settings Connectivity
> >
copy, and enter the settings according to
Options > Edit.
and the transfer contact from the list other
See "Configuration setting
Data transfer
>
copy.
and from
Packet data
>
Alias for access
>
are the
Data
>
Server sync.
>