Panasonic AW?HE120WP Operating Instructions Manual page 38

Parts and their functions
Furthermore, the pan and tilt movement range limits
(limiters) are set and released by operating the PRESET/
LIMIT button, MENU button and the pan/tilt buttons ([],
[], [] and []).
For details, refer to "Setting/releasing the limiters" (pages 87
to 88 in the <Operations and Settings>).
 Pan-tilt buttons and menu operation buttons
[] [] [] [] []
(1) These are used to change the unit's direction.
The unit is tilted in the up/down direction using the []
and [] buttons and panned in the left/right direction
using the [] and [] buttons.
The [] button does not work during tilting and
panning.
When the [] or [] and [] or [] buttons are
pressed at the same time, the unit moves diagonally.
(2) The buttons are used for menu operations when the
unit displays the camera menus.
Use the [], [], [] and [] buttons to select the
menu items.
When a selected item has a sub-menu, the sub-menu
will be displayed by pressing the [] button.
When the cursor is aligned with a particular item and
the [] button is pressed on the setting menu at the
bottom hierarchical level, the setting of the selected
item blinks.
When the [] button is pressed after the setting
has been changed using the [], [], [] and []
buttons, the setting stops blinking, and the new setting
is entered.
A setting for a regular menu item is reflected
immediately if it is changed while it is still flashing.
If the MENU button is pressed quickly (for less than
2 seconds) while the setting is in the blinking status,
the change will be canceled, and the setting selected
prior to the change will be restored.
Notes
p  To prevent malfunctioning, there are a number of
menu items (Scene, Format, Down Conv. Mode
and Frequency) whose setting is not reflected
immediately even if it is changed while it is still
flashing.
It is reflected only after the [] button has been
pressed, causing the setting to stop flashing and
the new setting to be entered.
p  A confirmation screen appears before the settings
of some menu items are to be entered.
 FOCUS buttons [F] [N]
These are used to adjust the lens focus manually when
the manual setting is established for the lens focus.
The focus is adjusted in the far using the [F] button and in
the near using the [N] button.
 A/FOCUS button
This is used when automatically adjusting the lens focus.
38
(continued)
 M/FOCUS button
This is used when manually adjusting the lens focus.
The FOCUS buttons ([F] and [N]) are used when
performing the actual adjustment.
 OPT buttons [ON] [OFF]
These are used for future expansion of the functions.
They are not used at the present time.
 HOME button
When this is pressed for 2 seconds, the unit's direction
(panning or tilting) returns to the reference position.
 ZOOM buttons [T] [W]
These are used to adjust the lens zoom.
The zoom is adjusted in the wide-angle using the [W]
button and in the telephoto using the [T] button.
 FAST button
This is used to change the movement speed at which
the panning, tilting, zooming and focusing operations are
performed to the high speed.
Note
p  The operating speed for panning and tilting when
the preset memory settings have been called can
be changed using the Preset Speed item of the
camera menu.
 SLOW button
This is used to change the movement speed at which
the panning, tilting, zooming and focusing operations are
performed to the low speed.
 A/IRIS button
This establishes the setting for adjusting the lens iris
automatically in line with the light quantity.
 M/IRIS button
This establishes the setting for adjusting the lens iris
manually.
The IRIS + and IRIS – buttons are used when performing
the actual adjustment.
 IRIS + button
This is used to adjust the lens iris in the opening direction.
 IRIS – button
This is used to adjust the lens iris in the closing direction.