Panasonic AW?HE120WP Operating Instructions Manual page 16

Stand-alone installation
5
Check the mounting.
6
Connect the rear panel connectors.
When three coaxial cables are to be connected, connect coaxial cable [2] first.
Square hole
(one at either side)
Tab (one at either side)
q How to secure the AC adaptor cable
p
1 Loosely secure the cable clamp.
Cable clamp
7
Attach the cable cover.
16
(when the mount bracket is going to be used) (continued)
Loosely secure the cable clamp
in the area shown above.
VGA cable
Coaxial cable [1]
Coaxial cable [2]
Coaxial cable [3]
HDMI cable
LAN cable
LAN cable
2 Fasten the cable clamp.
Strap part
Take hold of the strap part, slide
the cable clamp until it stops
moving, and then secure it tightly.
Screw for cable cover (M3 screw)
(with flat washer, spring washer)
AC adaptor cable