Installing And Switching On The Appliance - Russell Hobbs RHTTLF1 User Manual

Installing and Switching on the Appliance

• Operating voltage for your fridge is 220-240V at 50Hz.
• If you need help or are unsure how to install the unit, please contact Customer
Services on 0845 208 8750 or visit www.productcareuk.com.
• Before plugging in the power supply, ensure that the voltage on the nameplate
corresponds to the working voltage of your electrical system in your home.
• Insert the plug into an efficient Ground (Earth) connection. If the socket has no
Ground (Earth) contact or the plug does not match, we suggest you call an authorised
electrician for assistance.
• We do not take responsibility of the damages that occur due to Ungrounded (Un-
earthed) usage.
• Place your fridge in a place that is not exposed to direct sunlight.
• Your appliance should be placed at least 500 mm away from stoves, ovens and
other heating cores.
• It should never be used outdoors or left in the rain.
• When your fridge is placed next to a chest freezer or freezer, there should be at least
50 mm between them to prevent humidity on the outer surface.
• Do not place anything on your fridge and install your fridge in a suitable place so that
there is at least 300 mm clear above the appliance.
• If placing your fridge next to kitchen cabinets, leave 50 mm between them.
• The rear of the appliance should be at least 60 mm away from the back wall.
• The appliance must be used in the vertical position and on a flat surface. To level the
appliance use the adjustable foot on the front of the appliance.
• Do not place your appliance on a carpeted surface as this will prevent adequate
ventilation.
• Do not place hot food or containers in the fridge as this can damage your appliance.
For Customer Services & Spare Parts please call 0845 208 8750 Opening times: Monday - Friday 8am –
6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
4