Using Clamps - Invacare KSS Installation & Operation Instruction

Fixed Release Clamps For Seat
(FIGURE 14)
NOTE: Refer to INSTALLATION WARNING in the
SAFETY SUMMARY before proceeding.
NOTE: The quick release and fixed release clamps are
designed to fit either 1-inch rail tubing or, with insert pro-
vided, 7/8-inch rail tubing.
1. Remove the sleeve, lock washer, and internal
threaded mounting screw from the fixed release
clamp (DETAIL "C").
2. Place the fixed release clamp on the seat rail.
3. If fixed release clamp is not tightly fitted around seat rail
tubing, install insert provided as shown in DETAIL "C".
4. Install the fixed release clamp onto the back rail so
that the fixed portion is flush against and rests on top
of the mounting hook and is located between the
seat rail and the bottom of the mounting hook.
5. Reinstall the sleeve, lock washer, and internal mount-
ing screw into the fixed release clamp and torque to
75 - inch pounds.
6. Repeat STEPS 1-5 for other side.
7. Once fixed release mounting clamps are secured,
do one (1) of following:
A. Refer to QUICK RELEASE CLAMPS FOR
SEAT in PROCEDURE 2 of this instruction
sheet.
B. Refer to USING CLAMPS in this instruction sheet.
DET DET
DET DETA I L DET
Insert
Lock Washer
Sleeve
Back Cane
Fixed
Mounting
Portion
Hooks
Fixed Release
Clamp
NOTE: For TRANSPORT READY OPTION (TRRO) use
ONLY Quick Release Clamps on Seat Rails.
FIGURE 14 - QUICK RELEASE AND FIXED FIGURE 14 - QUICK RELEASE FIGURE 14 - QUICK RELEASE FIGURE 14 - QUICK RELEASE FIGURE 14 - QUICK RELEASE
RELEASE CLAMPS FOR SEA RELEASE CLAMPS FOR SEAT T T T T RELEASE CLAMPS FOR SEA
RELEASE CLAMPS FOR SEA RELEASE CLAMPS FOR SEA
A I L A I L "C" "C"
A I L A I L "C" "C" "C"
Internal Mounting Screw
Fixed
Portion
Release
Portion
Quick Release
Clamp
AND FIXED AND FIXED AND FIXED AND FIXED

USING CLAMPS

Twist Release (FIGURE 15)
1. To unlock the cane clamp, twist away from the
back cane.
2. To lock the cane clamp, twist in toward the back.
Twist Release
Cane Clamp
Mounting
Hook
Back Cane
NOTE: For TRANSPORT READY OPTION (TRRO)
Twist Release Cane Clamp is REVERSED.
FIGURE 15 - USING CLAMPS - FIGURE 15 - USING CLAMPS - FIGURE 15 - USING CLAMPS - FIGURE 15 - USING CLAMPS - TWIST RELEASE FIGURE 15 - USING CLAMPS -
Quick Release (FIGURE 16)
1. To unlock, push down on the release tab of the quick
release rail clamps.
2. To lock, push down on the thumb-like feature of the
quick release rail clamps.
TO UNLOCK APPLY
PRESSURE HERE
Wheelchair
Frame
Quick Release
FIGURE 16 - USING CLAMPS - QUICK RELEASE FIGURE 16 - USING CLAMPS - QUICK RELEASE FIGURE 16 - USING CLAMPS - QUICK RELEASE
FIGURE 16 - USING CLAMPS - QUICK RELEASE FIGURE 16 - USING CLAMPS - QUICK RELEASE
12
T T T T T OP OP VIEW OP OP OP VIEW VIEW VIEW VIEW
Unlock Back
TWIST RELEASE TWIST RELEASE TWIST RELEASE TWIST RELEASE
TO LOCK APPLY
PRESSURE HERE
Mounting
Hook
Rail Clamp