Changing Playback Function Settings - Canon PowerShot SX130 IS User Manual

Changing the IS-Mode Settings
• If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.

Changing Playback Function Settings

You can adjust the settings in the 1 tab by pressing the 1 button (p. 45).
Choosing the Image that First Displays in
Playback
Changing Playback Function Settings
●
Choose [IS Mode], then press the qr
buttons to choose an option.
Image stabilization is always on.
You can confirm the effects
Continuous directly on the display, which
makes it easier to check the
composition or focus.
Image stabilization is only active
Shoot Only
at the moment of shooting.
Image stabilization only counters
up and down motion. This option
Panning
is recommended for shooting
objects moving horizontally.
●
Choose [Resume], then press the qr
buttons to choose an option.
Resumes with the image last
Last seen
viewed.
Resumes with the most
Last shot
recently shot image.
149