Viewing Slideshows - Canon PowerShot SX130 IS User Manual

Viewing Slideshows

You can automatically play back images recorded to a memory card.
If you press the qr buttons or turn the  dial during playback, the image
•
will switch. If you keep the qr buttons pressed, you can fast-forward
through images.
• The power saving function does not work during slideshows (p. 49).
• You cannot change [Play Time] if [Bubble] is chosen in [Effect].
Choose [Slideshow].
●
Press the n button to choose
[Slideshow] from the 1 tab, then press the
m button.
Make the setting.
●
Press the op buttons or turn the  dial
to choose an item, then press the qr
buttons to adjust the setting.
Repeat Repeats playback of images
Play Time Display time for each image
Transition effects when switching
Effect
between images
Choose [Start].
●
Press the op buttons or turn the  dial
to choose [Start], then press the m
button.
X
The slideshow will start a few seconds
after [Loading image...] displays.
●
You can pause/restart a slideshow by
pressing the m button again.
●
Press the n button to stop the
slideshow.
113