Canon PowerShot SX130 IS User Manual page 173

Select Range
Set All Images to Print Once
Choosing Images for Printing (DPOF)
●
If you choose images in [Index],
appears on the screen. Pressing the m
button again will deselect the image and
will disappear.
Set the number of prints.
●
Press the op buttons or turn the  dial
to set the number of prints (maximum 99).
●
Repeat Steps 2 and 3 to choose other
images and the number of prints for each.
●
You cannot set the number of copies for
index prints. You can only choose which
images to print (as shown in Step 2).
●
Pressing the n button accepts the
settings and restores the menu screen.
Choose [Select Range].
●
In Step 1 on p. 136, choose [Select
Range], then press the m button.
●
Follow Steps 2 and 3 on p. 120 to choose
images.
Make print settings.
●
Press the op buttons to choose [Order],
then press the m button.
Choose [Select All Images].
●
In Step 1 on p. 136, choose [Select All
Images], then press the m button.
137