DeWalt DW331-XE Instruction Manual page 8

Setting the Bevel Angle (Fig. 3)
The adjustable shoe (I) allows cutting of LH and RH bevel angles up to 45˚. The bevel
scale has preset positions at 0˚, 15˚, 30˚ and 45˚.
1. Release the shoe lever (K).
2. Slide the shoe (I) toward the saw blade.
3. Tilt the shoe and set the desired bevel angle using the scale.
4. Tighten the shoe lever.
FIG. 3
Setting the Pendulum Stroke (Fig. 1)
The adjustable pendulum stroke guarantees a perfect cutting stroke for different
materials.
Slide the selector (J) to the desired position referring to the table below. The selector
can be manipulated during operation.
Position Wood
3 Fast cuts
2 Thick workpieces
I Setting the Sawdust Blower (Fig. 1)
The sawdust blower conducts an adjustable stream of air to the saw blade to keep the
K
workpiece clear of sawdust during operation.
Set the sawdust blower using the lever (D).
Mounting the Plastic
Anti-Scratch Shoe Cover
(Fig. 4)
The anti-scratch shoe cover (L)
reduces damage to the surface of
(sensitive) workpieces.
Click the cover onto the shoe as
shown.
Mounting and Removing
the Anti-Splinter Shoe
Metal Plastics
(Fig. 5A, 5B)
– PVC
The anti-splinter shoe insert (M)
which fits close to the saw blade reduces splintering of the workpiece.
– Fibreglass
The insert can be mounted into the shoe and the shoe cover.
Acrylic
Hold the insert (M) in the orientation as shown.
6
Position Wood
1 Plywood
Chipboard
0 Thin workpieces
Fine cuts
Low For working with metals, when using coolants and lubricants
and for use with dust extraction.
Intermediate For working with wood and similar materials in low speed.
High For working with wood and similar materials in high speed.
FIG. 4
Metal Plastics
Aluminium –
Non-ferrous –
Sheet metal –
L