3. After setting the option, press the Shift key to enter the
remote reading service ID setup mode.
(In case of selecting reading service ID in )
• This function is applicable to only korean market (Domestic)
So, skip this setting in the procedure for overseas market
Press the "SHIFT" key
- When the first two digits flash, use the s or t key to select the remote reading service ID by company.
CI-TOPIA ID setup
OUT DR ID(CITOPIA)
XX
OMNI SYS ID setup
OUT DR ID(OMNI-SYS)
XXXX
✱
When setting the remote reading service ID, enter the remote reading service ID
assigned by the remote reading service company.
4. After entering the remote reading service ID, press the Shift
key to enter the indoor address selection mode.
(In case of the selecting "Master/Slave")
LGAP
MICRONICS ID setup
OUT DR ID(MICRONIC)
XX
LS lS ID setup
OUT DR ID(LSIS)
XXXX
Installation
User's Manual 15