LG PQNUD1S00 Owners & Installation Manual page 14

Installation
• Standby power indication selection
- When the forth digit flashes, use the L or M key to select the standby power.
[0] NO-STBP -> Does not show the standby power
[1] CAL-STEP -> Shows the standby power
• Note : If the PDI has been set Slave in previous option selection then Certainly Set
NO-STBP
Ex) Product selection: Master, standby power indication selection
1 1 0 0 0 0 0 1
M I C R O N I C
✱
What is standby power selection function?
: Standby power refers to the electric power consumed by the product after the
operation of the product is turned off.
It is the function of separately saving the power consumed when all heating and
air conditioning indoor units are turned off.
14 Electricity Distribution Indicator
LGAP
[1] is set to CAL-STBP and
shows you the standby power.
M a s t e r 1 W / p
C A L - S T B P
Press the key to select
the option for standby
power.