Volvo XC60 2010 Owner's Manual page 276

07 Maintenance and specifications
Replacing bulbs
NOTE
Before starting to replace a bulb, see
page 274.
1. Open the retaining clamps by pressing
them to the sides.
2. Pull the cover straight out.
Reinstall the cover in the reverse order.
Low beam, Halogen
07
1. Remove the headlight housing from the
vehicle (see page 274).
2. Remove the cover over the bulbs (see
page 275).
2 Models with optional Active Bending Lights only.
276
3. Unplug the connector from the bulb.
4. Remove the bulb by pressing the holder
downward.
5. Remove the bulb by pulling it straight out.
6. Press the new bulb into the socket until it
snaps into place. It can only be secured in
one position.
7. Put the cover back into position and rein-
stall the headlight housing.
High beam, Halogen
1. Remove the headlight housing from the
vehicle (see page 274).
2. Remove the cover over the bulbs (see
page 275).
3. Remove the bulb by turning it counter-
clockwise and pulling it straight out.
4. Remove the connector from the bulb.
5. Press the new bulb into the socket and turn
it clockwise to put it in place. It can only be
secured in one position.
6. Reinsert the bulb holder into the headlight
housing.
7. Put the cover back into position and rein-
stall the headlight housing.
2
Extra high beam