Table of Contents
Advertisement
Setting Up the Parental Control
5. Select Rating Level using UP/DOWN buttons,
and press ENTER or RIGHT button.
6. Select the Rating Level you want using
UP/DOWN buttons.
For example, if you select up to Level 6, discs
that contain Level 7, 8 will not play.
- To cancel the Rating Level, select No using RIGHT or
ENTER in Use Password.
e.g) Setting up in LEVEL6.
RATING LEVEL
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
About the Change Password;
- Highlight Change Password using UP/DOWN buttons.
- Press ENTER button.
The Change Password screen appears.
- Enter your new password. Enter the new password again.
Note
Note
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
• If you have forgotten your password, see Forgot
Password in the Troubleshooting Guide.
ENG-32
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem
• Check the batteries in the remote. They may need replacing.
No operations can be
• Operate the remote control at a distance of no more than 20 feet.
performed with the remote.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try to operate the remote again.
• Ensure that the disc is installed with the label side facing up.
Disc does not play.
• Check the region number of the DVD.
5.1 channel sound is not
• 5.1 channel sound is reproduced only when the following condi-
being reproduced.
tions are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "Dolby 5.1 ch" mark
on the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
The
icon appears on
• The features or action cannot be completed at this time because:
screen.
1. The DVD's software restricts it.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that
is out of range.
Disc Menu doesn't appear.
• Check if the disc has a Menu.
Play mode differs from the
• Some of the functions selected in the Setup Menu may not work
Setup Menu selection.
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot
• The Screen Ratio is fixed on your DVDs.
be changed.
• Make sure you have selected the correct Digital Output in the
No audio.
Audio Options Menu.
The screen is blocked
• Press power on from a cold start with no disc in the unit.
Press the SEARCH/SKIP(
second. The SELECT MENU LANGUAGE display will appear.
Select the number button of the desired language.
Forgot password
• Press power on from a cold start with no disc in the unit.
Press the SEARCH/SKIP(
second. The SELECT MENU LANGUAGE display will appear.
Select the number button of the desired language.
Press the MENU button, and then press DOWN button to select
the Parental Setup. The Parental Setup is now unlocked as
indicated on the display. You can change your password.
• Go to the contents and find the section of the instruction book that
If you experience other
contains the explanations regarding the current problem, and follow
problems.
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
Action
Page
P5
P7
P11
P29
P13
P26~32
P30
P29
) button on the front panel for 1
P31
) button on the front panel for 1
P31~32
ENG-33
Advertisement
Table of Contents
