Install The Webcam Driver Cd - BT Starter Kit 2 User Manual

8157 Softphone SK2 UG Iss.3 [1]
6 Setting up

Install the webcam driver CD

You must complete the installation of the
webcam driver CD (Starter Kit drivers disc)
before you attach the webcam or the camera
will not work. The CD has an 'auto run'
feature that will start the installation,
please follow the on screen directions.
Once the drivers are installed you may need
to re-start your computer before attaching
the webcam.
The image below shows how the Softphone
panel will appear on your PC:
23/4/07 10:10
BT Softphone SK2 – Issue 3 – Edition 01 – 23.04.07 – 8157
Page 6
To either alter or check your settings or
devices you should select Devices from
the 'Softphone' > 'Options' menu.
If you need to change any of the camera
video settings you will need to exit from the
Softphone application and open the AMCap
application which you will find in your
Start/All Programs/BT Starter Kit 2 (SK2) USB
Web Camera menu. When the new window
opens select 'Video capture' filter from the
'Options' menu. This opens the settings
window shown below. You can change and
save your webcam settings from here.