Setting Up; Install The Bt Softphone Software; Connecting The Headset - BT Starter Kit 2 User Manual

8157 Softphone SK2 UG Iss.3 [1] 23/4/07 10:10 Page 5
BT Softphone SK2 – Issue 3 – Edition 01 – 23.04.07 – 8157

Setting up

5

Install the BT Softphone Software

You must install the BT Softphone Software using the BT Softphone Starter CD provided otherwise
you will not be able to make any BT Softphone calls. If you have any problems installing your
BT Broadband Talk Softphone Software, please contact the Helpline on 0870 2400 433.
After installing BT Softphone you may get a pop-up window advising that there is a new version of
Softphone available. It is recommended that you download and install the new version.

Connecting the headset

Connect the USB plug (attached to the cord of the headset remote control) to the USB port
of your PC or laptop computer. The LED indicator will light up indicating correct connection
to the computer.
You can check whether the USB controller is properly installed, by making sure the LED
indicator is lit, and then pressing MUTE, if the light flashes, then the device is properly installed.
USB Slot