Table of Contents
Advertisement
24
ACCESSORIES
1. Plastic Oiler
Sealed and Filled)
2. Package of Needles
5
3. Large Screw Driver
4. Small Screw Driver
5. Quilter Guide
6. Cloth Guide
Button Sewing Foot
Presser Foot for Straight
Stitching
Narrow Hemmer
Buttonhole Foot
Thumb Screw
Felt Washers 2
for spool pins
Bobbins (3)
Needle Plate for Straight Sewing (graduated)
4.
5.
When
1.
2.
3.
Clean the shuttle race, the shuttle and shuttle race cover by removing all threads, lint, etc.
Apply a dxop of oil with finger
tip
to outer edge of shuttle.
the cleaning has been completed, proceed as follows to replace the shuttle assembly:
Turn the balance wheel until the needle reaches its highest position.
Place shuttle body,
ID
,
against shuttle driver and adjust into position.
Replace shuttle race cover,
C
,
fitting pin
at lower edge into notch, and lock into
position with shuttle race cover clamps, B), making
certain
the clamps have been
m
1
3
snapped securely into position.
4. Put bobbin into bobbin case.
5. Put the bobbin case into the shuttle race, fitting
tongue into notch E of race cover.
I
;.
3
Fig. 43
:4,
7.
8.
9.
10.
11,
12.
13.
14.
Advertisement
Table of Contents
