Select an access point to be edited from the list or select
Options → New access point. Then, fill in the following
fields:
Note: Follow the instructions given to you by your service
provider very carefully.
• Connection name: Enter a descriptive name for the
connection.
• Data bearer: Select a network bearer.
• Access point name: The access point name is needed to
establish a connection to the network. You obtain the
access point name from your service provider.
• User name: Enter a user name if required by the service
provider. The user name may be needed to make a data
connection, and is usually provided by the service provider.
The user name is often case-sensitive.
• Prompt password: If you must enter a new password
every time you log on to a server, or if you do not want to
save your password to the phone, choose Yes.
• Password: A password may be needed to make a data
connection, and is usually provided by the service provider.
Enter the password. Be careful as it may often case-
sensitive.
• Authentication: Choose a user authentication mode,
Normal or Secure.
• Homepage: Depending on what you are setting up, enter
either the URL address of the web service or the address of
the multimedia messaging centre.
Settings
132