Battery - Pantech CDM8635 User Manual

Hide thumbs Also See for CDM8635:
Table of Contents

Advertisement

Battery

About your battery
Your phone uses a Li-Ion battery. Make sure to use an authorized
battery and charger only. For more details, please inquire at your
nearest dealer.
note: Your phone is powered by a Lithium Ion (Li-Ion) battery. This
means that, unlike other forms of battery technology, you can recharge
your battery while some charge remains without reducing your phone' s
autonomy due to the "battery memory effect" inherent in those
technologies.
Installing/removing battery
1. Remove the battery cover from the unit.
Push down and forward. To replace cover,
fit on guide rails and push back in place.
2. Put the contacts of the battery into the
hole located at the bottom of the unit
insert and press the upper side of the
battery until you hear the "click". Make sure you align the
gold contacts at the battery end with contacts on the phone.
If the contacts at the battery are not properly aligned,
damage could occur to the phone and the battery.
12
3. To remove the battery, push the
battery forward and up (2) and
remove (2) the battery.
To charge your battery
1. To charge, open the protective cover
on the bottom left side and connect
the charger adapter. The arrow on
the charger should face the top of the
phone.
2. To remove the adapter connection, pull
the adapter away.(1).

Advertisement

Table of Contents
loading

Table of Contents