Invacare Adjustable Back Upholstery Installation & Operating Instructions Manual page 3

After the adjustable tension back upholstery has been positioned to the user's
individual needs, the hook and loop fasteners MUST be securely fastened before
applying the back upholstery cover. The adjustable back should be checked upon
entering the chair to ensure that the hook and loop fasteners are securely fastened.
6. Attach back upholstery cover (hook and loop fasteners) to the back of the adjustable
back upholstery (hook and loop fasteners).
NOTE: Hook and loop fasteners on the back upholstery cover and adjustable back MUST line‐up.
7. Flip the back upholstery cover over adjustable back upholstery and secure (hook and
loop fasteners) to the front of the adjustable back upholstery.
8. Lay front portion of back upholstery cover on seat with existing cushion removed.
9. Adjust slack of back upholstery cover before replacing existing cushion.
Back Upholstery
Cane Handle
Mounting Screw
Locknut
Mounting Screw
Frame Back Tube
Back Upholstery
Cover
Hook and Loop
Fasteners
Back Upholstery Anchor
Loops
Part No 1039470
WARNING
Tab
FIGURE 1 Replacing The Back Upholstery Cover
3
Cable Tie
Axle Mounting Plate
Hook and Loop
Fasteners
Frame
Grommet Hole
Back Upholstery Adjuster Straps
Adjustable Tension Back Upholstery