Hardware Installation And Service Issues; Specific Issues And Workarounds - Fujitsu SPARC Enterprise M8000 Product Notes

Hardware Installation and Service Issues

This section describes hardware specific issues and workarounds.

Specific Issues and Workarounds

TABLE 1
Hardware Issues and Workarounds
TABLE 1
CR ID Description
6433420 The domain console might display a Mailbox
timeout or IOCB interrupt timeout error during
boot.
6488846 During boot, the domain console might display
a checksum error for the SG(X)PCI2SCSIU320-
Z SCSI controller I/O card.
6557379 Power cables are not redundant on single
power feed servers without the dual power
feed option.
lists known hardware issues and possible workarounds.
Workaround
Issue a reset-all command from the OBP
(OK) prompt and reboot.
Check for the availability of the latest
controller card firmware.
On servers that have single power feed, all
power cables must be connected and powered
on at all times.
SPARC Enterprise M8000/M9000 Servers Product Notes 7