Trouble-Shooting - Braun 5697 Manual

Trouble-Shooting

Problem:
SHAVER
Unpleasant
smell from the
shaver head.
Battery
performance
dropped
significantly.
Shaving
performance
dropped
significantly.
Shaver turns off
with fully
charged battery.
Battery
segments in the
display are
skipped with
decreasing
battery capacity.
Shaving parts
have been
changed recently
but replacement
symbol lights up.
10
Possible reason:
Shaver head is cleaned
with water.
1. Foil and cutter are
worn which requires
more power for each
shave.
2. Shaver head is
regularly cleaned with
water but not
lubricated.
1. Foil and cutter are
worn.
2. Personal setting of
shaving performance
has been changed.
3. Shaving system is
clogged.
Foil and cutter are worn
which requires more
power than the motor
can deliver. The
appliance turns off.
Foil and cutter are worn
which requires more
power for each shave.
Reset button has not
been pushed.
Remedy:
When cleaning the shaver head
with water only use hot water and
from time to time some liquid soap
(without abrasive substances).
Remove Foil & Cutter cassette to
let it dry.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned
with water, apply a drop of light
machine oil on top of the foil
once a week for lubrication.
1. Renew Foil & Cutter cassette.
2. For a thorough and fast shave
we recommend the green
(intensive) setting.
3. Soak the Foil & Cutter cassette
into hot water with a drop of
dish liquid. Afterwards rinse it
properly and tap it out. Once
dry apply a drop of light
machine oil on the foil.
– Renew Foil & Cutter cassette.
– Regularly oil the shaving
system, especially when
cleaning with water only.
– Renew Foil & Cutter cassette.
– Regularly oil the shaving
system, especially when
cleaning with water only.
– Push the reset button for at
least 3 seconds to reset the
counter.