Xp 64-Bit Without Raid Functions; Installing Windows; Functions - ASROCK A75 Pro4/MVP User Manual

2.18 Installing Windows

XP 64-bit Without RAID Functions

If you want to install Windows
OS on your SATA3 HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.18.1 Installing Windows
If you want to install Windows
functions, please follow below steps.
Using SATA3 HDDs with NCQ and Hot Plug functions (AHCI mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Coniguration.
B. Set the "SATA Mode" option to [AHCI].
STEP 2: Make a SATA3 Driver Diskette.
Make a SATA3 driver diskette by following section 2.17.1 step 2 on page 44.
STEP 3: Install Windows
You can start to install Windows
®
ning of Windows setup, press F6 to install a third-party AHCI driver. When prompt-
ed, insert the SATA3 driver diskette containing the AMD AHCI driver. After reading
the loppy disk, the driver will be presented. Select the driver to install according to
the OS you install.
Using SATA3 HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Coniguration.
B. Set the "SATA Mode" option to [IDE].
STEP 2: Install Windows
7 / 7 64-bit / Vista
®
®
7 / 7 64-bit / Vista
XP / XP 64-bit Without RAID Functions
®
®
XP / XP 64-bit on your SATA3 HDDs without RAID
Advanced screen
®
XP / XP 64-bit OS on your system.
®
XP / XP 64-bit OS on your system. At the begin-
Advanced screen
®
XP / XP 64-bit OS on your system.
46
/ Vista 64-bit / XP /
TM TM
TM TM
/ Vista 64-bit / XP / XP 64-bit
Storage
Storage