Installing Windows; 64-Bit / Vista; Raid Functions - ASROCK A75 Pro4/MVP User Manual

STEP 3: Use "RAID Installation Guide" to set RAID coniguration.
Before you start to conigure RAID function, you need to check the RAID installation
guide in the Support CD for proper coniguration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
After step 1, 2, 3, you can start to install Windows
system. At the beginning of Windows
driver. When prompted, insert the SATA3 driver diskette containing the AMD RAID
driver. After reading the loppy disk, the driver will be presented. Select the driver to
install according to the OS you install.

2.17.2 Installing Windows

RAID Functions

If you want to install Windows
composed of 2 or more SATA3 HDDs with RAID functions, please follow below
steps.
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Coniguration.
B. Set the "SATA Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID coniguration.
Before you start to conigure RAID function, you need to check the RAID installation
guide in the Support CD for proper coniguration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Make a SATA3 Driver Diskette.
Make a SATA3 driver diskette by following section 2.17.1 step 2 on page 44.
STEP 4: Install Windows
system.
®
XP / XP 64-bit OS on your system.
®
setup, press F6 to install a third-party RAID

7 / 7 64-bit / Vista

®
®
7 / 7 64-bit / Vista
Advanced screen
® TM
7 / 7 64-bit / Vista
45
®
XP / XP 64-bit OS on your
/ Vista
TM TM
TM TM
/ Vista 64-bit on a RAID disk
Storage
TM
/ Vista 64-bit OS on your
64-bit With