Invacare 2GT Parts Catalog page 52

ABS Curved Back without Mounting Hardware
Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R.
NOTE: CURV Metal Backs will only attach to Round Back Canes only. Hardware to attach to the Key
NOTE: Wheelchairs with serial number dated for 2005 and after, call a Customer Service Parts Specialist
for additional information on ordering a warranty ABS Back Pan replacement.
NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back
pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed.
Material height listed is rounded off to the nearest whole number.
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
Overall
Back
Height
20"
21"
22"
23"
24"
25"
26"
NOTE: A - No longer available. Must be ordered as separate components, Item 1 (Back Pan) and Item 2 (Back Cushion Assembly).
Form No. 03-026
Slotted Extruded Back Canes is not available.
#3 Back Assembly w/o Hardware (20" - 22" W)
Material
Back
Height
15"
16"
17"
18"
19"
20"
21"
To order call toll free 1-800-333-6900, or www.invacare.com
20" Wide
1090593-NLA 1090594-NLA
See Note(s) A
1090600-NLA 1090601-NLA
See Note(s) A
1090607-NLA 1090608-NLA
See Note(s) A
1090614-NLA 1090615-NLA
See Note(s) A
1090621-NLA 1090622-NLA
See Note(s) A
1090628-NLA 1090629-NLA
See Note(s) A
1090635-NLA 1090636-NLA
See Note(s) A
51
21" Wide
1090595-NLA
See Note(s) A See Note(s) A
1090602-NLA
See Note(s) A See Note(s) A
1090609-NLA
See Note(s) A See Note(s) A
1090616-NLA
See Note(s) A See Note(s) A
1090623-NLA
See Note(s) A See Note(s) A
1090630-NLA
See Note(s) A
1090637-NLA
See Note(s) A See Note(s) A
22" Wide