Invacare 2GT Parts Catalog page 51

ABS Curved Back without Mounting Hardware
Recline Only (2GR) and Tilt/Recline (2GTR) with V.S.R.
NOTE: CURV Metal Backs will only attach to Round Back Canes only. Hardware to attach to the Key
NOTE: Wheelchairs with serial number dated for 2005 and after, call a Customer Service Parts Specialist
for additional information on ordering a warranty ABS Back Pan replacement.
NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back
pan. Back pan material height can be calculated by subtracting 4-3/4" from the overall back height listed.
Material height listed is rounded off to the nearest whole number.
NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.
This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.
Overall
Back
Height
20"
21"
22"
23"
24"
25"
26"
NOTE: A - No longer available. Must be ordered as separate components, Item 1 (Back Pan) and Item 2 (Back Cushion Assembly).
Form No. 03-026
Slotted Extruded Back Canes is not available.
#3 Back Assembly w/o Hardware (16" - 19" W)
Material
Back 16" Wide
Height
1090589-NLA
15"
See Note(s) A
1090596-NLA
16"
See Note(s) A
1090603-NLA
17"
See Note(s) A
1090610-NLA
18"
See Note(s) A
1090617-NLA
19"
See Note(s) A
1090624-NLA
20"
See Note(s) A
1090631-NLA
21"
See Note(s) A
To order call toll free 1-800-333-6900, or www.invacare.com
17" Wide
1090590-NLA 1090591-NLA
See Note(s) A
1090597-NLA 1090598-NLA
See Note(s) A
1090604-NLA 1090605-NLA
See Note(s) A
1090611-NLA 1090612-NLA
See Note(s) A
1090618-NLA 1090619-NLA
See Note(s) A
1090625-NLA 1090626-NLA
See Note(s) A
1090632-NLA 1090633-NLA
See Note(s) A
50
18" Wide 19" Wide
1090592-NLA
See Note(s) A See Note(s) A
1090599-NLA
See Note(s) A See Note(s) A
1090606-NLA
See Note(s) A See Note(s) A
1090613-NLA
See Note(s) A See Note(s) A
1090620-NLA
See Note(s) A See Note(s) A
1090627-NLA
See Note(s) A See Note(s) A
1090634-NLA
See Note(s) A See Note(s) A