Chapter1; Preparing The Scanner; Checking The Contents Of The Scanner Package; Names Of Parts - Fujitsu FI-5015C Getting Started

Chapter1

1.1 Checking the Contents of
the Scanner Package
When you unpack the scanner package, make sure that
the package contains all the parts on the list included in
the package.
If any parts are missing or defective, contact your scan-
ner dealer or an authorized FUJITSU scanner service
provider. Handle the scanner and accessories with care.

1.2 Names of Parts

This section describes the names of parts.
Side Guide
ADF paper chute
Automatic Document Feeder (ADF)
USB connector
ADF cable connector

PREPARING THE SCANNER

Extension
Document cover
Document
stopper
Flatbed

Operator panel

Shipping lock
Main power switch
DC inlet
1.3 Operator panel
The operator panel is located on the front side of the
scanner. The panel consists of a Function Number Dis-
play, four buttons and a LED.
(1)
(2)
.
Name
Function Number
Display (2)
But- Function (1)
tons
Send to (3)
Scan (4)
Power button
(6)
Power LED(5)
*) About the settings on the launcher, refer to TWAIN
scanner driver help and the "fi-5015C Operator's
Guide" on the Setup DVD-ROM.
1
(3)
(4) (5)
Function
Indicates the state of the scan-
ner. The meaning of the num-
bers and alphabets indicated are
explained later in this section.
Changes the Function activated
by the Send to button.
Launches the linked application
software (*).
Turns the scanner ON and OFF.
Lights when the scanner is
turned ON.
(6)