Assign Ip Addresses In Multiple Devices; Set The Password - Axis P8513 Installation Manual

AXIS P85 Network Camera Series

Assign IP addresses in multiple devices

AXIS Camera Management speeds up the process of assigning IP
addresses to multiple devices, by suggesting IP addresses from a
specified range.
1. Select the devices you wish to configure (different models can be
selected) and click the Assign IP button
Select Assign the following IP address range and enter the range
2.
of IP addresses, the subnet mask, and default router the devices will
use.
Click OK.
3.

Set the password

To gain access to the product, the password for the default
administrator user root must be set. This is done in the Configure Root
Password dialog, which is displayed when the network camera is
accessed for the first time.
To prevent network eavesdropping when setting the root password, this
can be done via an encrypted HTTPS connection, which requires an
HTTPS certificate.
To set the password via a standard HTTP connection, enter it in the
Configure Root Password window.
To set the password via an encrypted HTTPS connection, follow these
steps:
Click the Create self-signed certificate button.
1.
2. Provide the requested information and click OK. The certificate is
created and the password can now be set securely. All traffic to and
from the network camera is encrypted from this point on.
Page 11
.