G-Code Extend; Auto Power Off - Samsung DVD-V7500K User Manual

G-Code Extend

To prevent delays or over-runs the VCR has a function
called G-Code Extend allowing you to extend the
recording time by up to 60 minutes.
• Only use if PDC is not available or set to Off.
• The View settings have been configured before running
the G-code feature.
Press the MENU button, then press the OK or √
1
button.
Press the ... or † button to select User Set, then
2
press the OK or √ button.
The User Set menu is displayed.
...
or † button to select G-Code
3 Press the
Extend.
Colour System
SETUP
NICAM
DVD
IPC

G-Code Extend

VCR
PROG
FUNC
OK
Press the OK or √ button to select the required
4
time by increments of 10 minutes.
➝Off ➝ 10 ➝ 20 ➝ 30 ➝ 40 ➝ 50 ➝ 60
• Press the MENU button to exit the menu.
User Set
√ √
: Auto
√ √
: On
√ √
: On
√ √
: Off
RETURN MENU

Auto Power off

This feature automatically turns off your DVD-VCR if no
signal is received and you do not press any button for the
selected time.
Press the MENU button, press the OK or √ button.
1
Language
SETUP
Clock
DVD
Install
User Set
VCR

Auto Power Off

PROG
Screen Messages : On
FUNC
OK
...
or † button to select Auto Power Off.
2 Press the
SETUP Language
Clock
DVD
Install
User Set
VCR
Auto Power Off
PROG
Screen Messages : On
FUNC
OK
Press the OK or √ button to select the preset
3
interval.
➝ Off ➝ 1 Hour ➝ 2 Hour ➝ 3 Hour
• Press the MENU button to exit the menu.
Setup
√ √
: English
√ √
√ √
√ √
√ √
: Off
√ √
RETURN MENU
Setup
√ √
: English
√ √
√ √
√ √
√ √
: Off
√ √
RETURN MENU
English - 25