Table of Contents
Advertisement
2. Program Installation
2.1 Introduction
This section describes step-by-step method to install Z020 USB MODEM and
Zapp Online Express Software.
<
Note>
Must install the software before connecting Z020 USB MODEM to PC/Notebook.
2.2 Minimum System Requirement
2.2.1 PC Hardware
Recommend to use PC/Notebook at speed of 300 MHz or higher.
Minimum 233 MHz speed required, * Intel Pentium/Celeron products,
AMD K6/Athlon/Duron products or compatible processors
Recommend to use 128MB RAM or higher
Minimum 64MB of memory must be used,
but in this case the performance will be degraded and certain features will be limited.
At least 100 MB of free hard disk space is required.
Motherboard or PCI card that supports USB.
Video adaptor with Super VGA (800 x 600) or higher resolution and Monitor
CD-ROM or DVD Optical Drive
Keyboard and Mouse
2.2.2 Operating System
Windows XP Home or Professional (with Service Pack 2)
Windows 2000 (with Service Pack 4 for optimal performances)
Windows Vista
< Recommended parameters >
Windows Update : Keep your computer up to date
Zapp – The Next Generation Network
(User Manual)
Z020 – EVDO Modem
8/48
Advertisement
Table of Contents
