Getting Started - Zapp Z020 User Manual

1. Getting Started

In order to use Z020 USB MODEM following must be satisfied:
1) Zapp Online Software and Z020 USB MODEM Driver has been installed
on the computer.
2) The Z020 EVDO modem is active (the activation process has been successfully completed – this
is indicated by POWER LED in green colour, and then by the restart of the modem).
<CAUTION> PLEASE CONNECT THE BATTERY AND EXTERNAL POWER SUPPLY TO INSURE MAXIMUM
PERFORMANCE OF THE MODEM. IF USING THE MODEM WHILE ON-THE-ROAD, PLEASE
KEEP BATTERY INTACTED WITH THE MODEM. AND MAKE SURE THE BATTEY IS FULLY
CHARGED BEFORE THE USAGE. WHEN THE BATTEY CAPACITY IS LOW, MAKE SURE TO
CHARGE IT BEFORE CONTINUING TO USE.
Zapp – The Next Generation Network
(User Manual)
Z020 – EVDO Modem
4/48