Connect Your Speakers; Connect Your Subwoofer; Connect Your Tv Or Video Display - Harman Kardon AVR 3650 Quick Start Manual

AVR

Connect Your Speakers

How to use the AVR speaker terminals:
1. Unscrew Cap 2. Insert Bare Wire
Always connect the colored (+) terminal on the AVR to the (+) terminal on the speaker (usually red),
and the black (–) terminal on the AVR to the (–) terminal on the speaker (usually black).
IMPORTANT: Make sure the (+) and (–) bare wires do not touch each other or the other terminal.
Touching wires can cause a short circuit that can damage your receiver or amplifier.
Connect the speakers as shown in the illustration.

Connect Your Subwoofer

Use a single RCA audio cable to connect the receiver's Subwoofer Pre-Out connector to your subwoofer.
Consult your subwoofer's user manual for specific information about making connections to it.
Receiver
Subwoofer
Connector
3. Tighten Cap

Connect Your TV or Video Display

If your TV has an HDMI connector: Use an HDMI cable (not included) to connect it to the receiver's
HDMI Monitor Out connector. You do not need to make any other connections to your TV from the
receiver or from any of your video source components.
Receiver
HDMI Monitor Out
Connector
If your TV does not have an HDMI connector: Use a composite video cable (not included) to connect
the receiver's Composite Monitor Out connector to your TV's composite video connector.
Receiver
Composite
Monitor Out
Connector
Note: The HDMI connection to your TV is preferred. If you use the composite video connection to your
TV, you will not be able to view the receiver's on-screen menus.
Single
RCA Audio Cable
(not supplied)
HDMI Cable
(not supplied)
Composite Video
Cable
(not supplied)
Connections
Powered
Subwoofer
TV
TV
3