To Confirm And Edit A Timer Programme - Panasonic Diga DMR-BWT720 Operating Instructions Manual

To confirm and edit a timer
programme
1
Press [PROG/CHECK].
e.g.,
Timer Recording HDD
Channel Name
New Timer Programme
Total 3/32
OK
Turn
RETURN
Timer Off
2
Select the programme, then perform the
operations.
To deactivate a timer programme
Press the red button.
• The timer icon "F" will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon "F" will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to "Timer recording options".
( 31)
3 Press [OK].
To show programme information
Press [STATUS
To exit the timer recording list
Press [EXIT ].
30:30 DR SUN 01.01.2012 08:05
Schedule Space
Mode
SAT 08.01
OK
DR
11:00 - 11:45
SAT 08.01
OK
HG
10:00 - 11:50
SAT 08.01
DR
11:30 - 1:00
SAT 01.01
DR
8:00 - 10:45
Info
Delete
Page Up
Page Down
].
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[ Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
• Programme overlapping can be resolved
with repeat programme if available.
Select the programme, then press the
green button.
( 30, If "Overlapped Timer Recording"
screen appears)
• This function is not available for the timer
programmes that were set manually.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (
Guide Link ( 31)
Guide
Split Programme (
S/P
Series Timer Recording (
OK
Displayed if the recording can fit in the
remaining space
Daily or weekly timer programme is set.
(Date)
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (
- programmes are deactivated, etc.
Recording
31).
31)
31)
109)
33
VQT4C69