Troubleshooting - HoMedics mē elōs User Manual

Troubleshooting

Indicator
No lights are on
All elōs energy level lights are
blinking
Cartridge activation button is
blinking
Error light is blinking in red,
cartridge % buttons blink as
well.
Error light is blinking
No light flashes from cartridge
treatment window.
22
me ˉ
HOMEDICS
What does it mean
Control Panel
Power cable is not connected
No elōs energy level was
selected.
elōs energy level was
selected. Cartridge activating
button flashes to indicate that
it needs to be pressed.
Ambient (room) temperature
is too high.
Need to reset the system.
1. RF skin contact bars not
in contact with the skin in
treatment area.
2. Cartridge activation button
is n ot pressed.
How to react
Connect power cable
Select an elōs level. The
applicator fan will start blowing
indicating that the cartridge is
active.
Press the cartridge activation
button. The applicator fan will
start blowing indicating that the
elōs cartridge is active.
Move to a cooler area with a
room temperature of less than 86
degrees Fahrenheit (30 degrees
Celsius) and restart the system.
Reset:
1. Disconnect power cord.
2. Wait until all lights are off (up
to 2 minutes).
3. Reconnect the power cord
and turn system on.
In order for the system to flash
pulses, make sure all 3 conditions
are met: RF skin contact bars
in contact with skin, cartridge
activation button on, elōs level
selected.