Function; Operation; Putting Into Storage - Gardena HiCut 4019 Operating Instructions Manual

4. Function

Mowing correctly :

5. Operation

Adjusting the cutting height :
9
Mowing with the Grass
Catcher (accessory) :

6. Putting into storage

Storage :
4
To produce a well-maintained lawn we recommend cutting the
lawn regularly once a week if possible. The lawn becomes thicker
if cut frequently.
Relatively long cut grass (> 1 cm) must be removed so that the
lawn does not become yellow and matted.
After relatively long intervals between mowing (e.g. holiday),
first of all cut in one direction with the cutting height as high as
possible, then cut in the crosswise direction at the cutting height
required.
Wherever possible, only mow dry lawns. Damp lawns may lead
to uneven cutting.
With very dense grass, we recommend thatching the lawn. For
example with the GARDENA Lawn Aerator art. 4068.
The cutting height can be set to any position between 12 mm and
56 mm (0,5 " - 2,2 ").
1. Slacken the two locking screws
required on the scale
2. Tighten the two locking screws
height.
The locking screws
on both sides.
B
The mower may only be adjusted to a depth in which the lower
blade does not touch the ground when it is uneven.
v Fit the Grass Catcher art. 964.90.10- 30 in accordance with
the instructions for the Grass Catcher and hook onto the Hand
Cylinder Lawnmower.
The storage location must be inaccessible to children.
1. Clean mower before storage.
2. Store mower in a dry place.
To save space the upper part of the upright can be folded up by
removing the wing nuts.
9
and set to the height
B
.
9
on both sides to the same
9
must always be set to the same height