Advertisement
CLOCK SETTING
To change between the 12 and 24 hour clock format, press the
*
AHEAD
and
BACK
buttons together simultaneously while in the
clock mode.
To begin, press the
SET CLOCK
button.
1
The
symbol and time will be blinking.
AM
Press the
AHEAD
or
BACK
button to
2
toggle the time forward or back.
NOTE: You may press and hold the
button down to accelerate the setting.
Press the
SET CLOCK
button.
3
The
symbol and day will be blinking.
Press the
AHEAD
or
BACK
button to
4
toggle the day forward or back.
5
Press the
SET CLOCK
button to complete.
NOTE: If no button is pressed within 16 seconds, the display will
automatically return to the normal clock display.
PAGE 5
TROUBLESHOOTING
PROBLEM
SOLUTION
Display shows a blank screen.
Make sure that the thermostat is fully installed. Refer to
the INSTALLATION section. Check that the power supply
has been reconnected at the circuit breaker or fuse. If
the heater or heating appliance has a power switch of its
Y
own, check to see that it has been turned ON. Also, you
may try pressing the
RESET
button.
If the screen remains blank after a reset, it may be that
the internal battery has become completely discharged.
To correct this problem, leave the thermostat installed as
it is for several hours and then press the
again. This should be ample time for the internal battery
to recharge itself and resume normal LCD screen
operation.
Buttons are not responding; or
Press the
RESET
button to reset the thermostat.
the display seems frozen or
abnormal.
Display shows the
symbol on
This symbol indicates a POWER FAILURE or that the
the screen.
power supply is not getting through. Check that the
power supply has been reconnected at the circuit breaker
or fuse. If the heater or heating appliance has a power
R
switch of its own, check to see that it has been turned ON
(or to the MAX). Also, ensure that the LOAD is at least a
minimum of 750W.
PAGE 12
PROGRAM SETTING
This thermostat is equipped with
5+1+1 day programming
programming for Weekdays, Saturday and Sunday, with four settings per day.
This thermostat is pre-programmed for your convenience or you can set your
own programs as desired.
DAY
The pre-programmed schedule is as follows:
TIME
WE
PERIOD
P
TIME
WEEKDAYS
MORNING
P1
6:00 am
21.0 C (70
o
DAY
P2
8:00 am
o
16.5 C (61.5 F)
EVENING
P3
6:00 pm
21.0 C (
o
C
o
NIGHT
P4
10:00 pm
16.5 C (6
The program settings are arranged in a circular pattern starting with
*
P1 for Weekdays:
Cycle through each program setting by pressing the
PAGE 6
TECHNICAL SPECIFICATIONS
Rating: 240V AC, 60Hz
Maximum Load: 15A resistive; 3600W @ 240V
Minimum Load: 750W
Precision: +/- 0.2 C
°
RESET
button
CONTACT US
UPM Marketing Inc.
Unit 10B - 250 Shields Court
1
Markham, Ontario
L3R 9W7
CANADA
CUSTOMER SUPPORT: 1-888-468-6876
PAGE 13
PROGRAM SETTING
To set your own programs, follow the steps below. Remember to set all 12
- separate
program settings: 4 for Weekdays, 4 for Saturday and 4 for Sunday.
1
Press the
NOTE: You will begin with P1 for Weekdays.
SATURDAY
SUNDAY
Press the
2
.0 F)
o
21.0 C (70
o
.0 F)
o
21.0 C (70
o
.0 F)
o
toggle the time forward or back.
o
o
o
o
o
16.5 C (
6
1.5
F)
16.5 C (
6
1.5
F)
70.0 F)
o
21.0 C (
o
70.0 F)
o
21.0 C (
o
70.0 F)
o
Press the
3
o
o
o
o
o
1.5
F)
16.5 C (
6
1.5
F)
16.5 C (
6
1.5
F)
toggle the SET temperature up or down.
Press the
4
the next program setting. (i.e. P2).
Repeat steps
5
settings have been completed.
NOTE: If no button is pressed within 16 seconds, the display will
automatically return to the normal display.
PROGRAM
button.
PROGRAMMING
PROGRAMMING
PROGRAM
button to start.
FOR WEEKDAYS
FOR WEEKDAYS
MO TU WE TH FR
AM
AHEAD
or
BACK
button to
PROGRAM
PROGRAM
TIME
TIME
1
UP
or
DOWN
button to
C
PROGRAM
button to advance to
P1
C
2
–
4
until all 12 program
SET
SET
PROGRAM
PROGRAM
TEMPERATURE
TEMPERATURE
NUMBER
NUMBER
PAGE 7
Advertisement
