UniData Communication Systems WPU-7700 Enterprise Edition User Manual page 53

Error Messages
108 Wrong route certificate
109 Failed to be connected to AP since you
have wrong D or passwords (802.1×).
110 802.1× Certification has exceeded the
limited time.
111 AP has failed in 802.1× certification.
112 Failed in 802.1×
unknown reasons.
201 Cannot get Internet addresses.
202 Internet addresses conflict with other
devices.
This message appears when there are problems in the route
certificates installed WiFi phones. For more details, contact your
dealer.
Check the 802.1× user account and password set in WiFi phones.
You can change them by pressing Wireless LAN Search, Edit, and
802.1× Certification buttons in turn.
This message appears when time is out in renewing 802.1×
certification. Try reconnection to relevant wireless LAN profiles.
Still, if such a message continues to appear, contact your dealer.
This message appears when wire/wireless sharers or access points
do not support the 802.1× certification type set in WiFi phones.
For more details, contact your dealer.
certification for Failed in 802.1× certification for unknown reasons. For more
details, contact your dealer.
1) Check the wire/wireless sharer in use corresponds to the
encryption setting. You can check it in Wireless LAN Search,
Edit, and Set Encryption.
2) Check whether it was set to DHCP in manual IP environment.
After changing to 'Enter in Person' in Wireless LAN Search, Edit,
and Set Encryption, enter IP addresses, subnet masks, and basic
gateways yourself.
1) If WiFi phones have been set to a fixed IP, change IP addresses.
Before changing IP addresses, check whether IP addresses that
you want to change are used with ping command in DOS window.
2) If WiFi phones have been set to variable IP, turn it on again
after turning off the power.
52
Measures