Update Notification; Upgrade Notification; Setting The Others [Other]; Auto Standby - Denon DNP-720AE Owner's Manual

Update Notification

Displays a notification message on this unit's menu screen when the
latest firmware is released with "Firmware Update".
Connect to broadband Internet (vpage 6) when using this
function.
1
[MENU]
Press .
Turns on the Menu settings mode and the Menu appears on
the display (vpage 20 "Menu map").
2
Use ui to select "Network" – "Other Network" –
"Update Notification", then press
< / ENTER> or p .
1 3
"Update Notification" menu appears.
3
ui [ENTER]
Use to "On", then press
< / ENTER> or p .
1 3
On
Display update message.
Off
Do not display update message.
[ENTER] <1/3 ENTER>
• When you press or
notification message, the "Check for Update" is displayed. (Refer to
page 28 for more information on "Firmware Update".)
o
• Press to erase the notification message.

Upgrade Notification

Display a notification message on this unit's menu screen when
downloadable firmware is released with "Add New Feature".
Connect to broadband Internet (vpage 6) when using this
function.
1
[MENU]
Press
Turns on the Menu settings mode and the Menu appears on
the display (vpage 20 "Menu map").
2
Use ui to select "Network" – "Other Network" –
[ENTER]
, "Upgrade Notification", then press
< / ENTER>
1 3
"Upgrade Notification" menu appears.
3
ui
, Use to "On", then press
< / ENTER>
1 3
On Display upgrade message.
Do not display upgrade message.
Off
• When you press
during display of the
notification message, the "Add New Feature" is displayed. (Refer to
page 28 for more information on "Add New Feature".)
o
• Press to erase the notification message.
Setting the network [Network]
.
[ENTER]
,
or p .
[ENTER]
,
or p .
[ENTER] <1/3 ENTER>
or during display of the

Setting the others [Other]

Auto Standby

With the Auto Standby ON, this unit will automatically enter the
standby mode after about 30 continuous minutes of stop mode with
no operation.
• The default setting is "Off".
1
Press [MENU] .
Turns on the Menu settings mode and the Menu appears on
the display (vpage 20 "Menu map").
2
ui
Use to select "Other" – "Auto Standby", then
press [ENTER] , < / ENTER> or
1 3
"Select Auto Standby" menu appears.
3
ui
Use to select "On", then press
< / ENTER> or p .
1 3
The setting is entered.
NOTE
In the following situations, the Auto standby function does not operate.
• When an iPod or USB memory device is connected to the USB/iPod
port on the unit.
• When the input source is "TUNER".
• When the input source being played is "Internet Radio", "Music
Server", "Last.fm" or "Napster".
ENGliSh
p .
[ENTER]
,
27