Installing On The Wall - Samsung SyncMaster 211MP Owner's Instructions Manual

rubens_monitor_eng 1/28/03 8:40 PM

Installing on the Wall

1
Removing the Stand
Using a hexagonal wrench, remove the stand.
2
Removing Rubbers
Remove the four rubbers from the edges.
3
Mounting on the Wall
Mount the stand on the wall using screws or nails.
4 Fixing the Set
Using a hexagonal wrench, fix your set into the stand.
Installation Notes
Do not install your set on any place other than vertical
walls.
To protect the performance of your set and prevent
troubles, avoid the followings:
- Do not install next to smoke and fire detectors.
- Do not install in an area subjected to vibration or high
voltage.
- Do not install in the wall.
- Do not install near or around any heating apparatus.
Use only recommended parts and components.
Page 7
English-7