The [Reset] Button; Record Or Play From A Specified Measure - Yamaha PortaTone PSR-1700 Owner's Manual

Record Functions

The [RESET] Button

RESET PLAY/STOP
STEP
BWD

Record Or Play from a Specified Measure

You can start SONG MEMORY recording or playback from any specified measure, as long as the specified
measure is within the range of measures that has already been recorded:
Z
Press the [MEASURE #] Button If Necessary ......................................................................................
MEASURE #
X
Enter the Desired Measure Number .....................................................................................................
– +
0
RESET
C
Start Playback or Recording .................................................................................................................
Before Punch In/Out
After Punch In/Out
44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Press the SONG [RESET] button to go directly to the first measure of
the song and turn ON all tracks that contain data. Measure number "001"
STEP
FWD
will appear on the LCD display panel. The [RESET] button also functions
during playback or realtime recording.
PSR-1700
Mes=0 – 01:BT=1
If the measure number is not currently shown on the LCD display panel,
press the [MEASURE #] button. If the measure number is already showing,
go directly to step X.
Use the [+] and [–] buttons, the number buttons, the data dial, or the
[MEASURE #] button itself to enter the desired measure number.
1 2
Start playback or recording. You can now start playback or recording
from the specified measure number.
NOTES
Example:
VOICE
A
1 2
Start Recording
(Punch In)
VOICE
A
1 2
Old Data
(Same as Before)
NOTES
PSR-2700
08:Showtune 001:GrandPno
AccOff
• This function allows you to "punch-in" and "punch-out" at any measure
to re-record a section of a previously-recorded track.
VOICE
3 4 5 6 7
Stop Recording
(Punch Out)
VOICE VOICE
C
3 4 5 6 7
New Data
(Same as Before)
• Recording is carried out in 1-measure units. If you punch out in the
middle of a measure, rests will be recorded for the remainder of that
measure.
Mes=0 – 01:BT=1
• Voice, volume, pan, pitch
B bend, modulation, tempo,
8 9
harmony on/off, effect on/off,
dual on/off, DSP depth and
revoice data changes made
during the punch-in remain in
effect even after the punch-
B
out point until further param-
8 9
eter changes are encoun-
Old Data
tered in the old data.