Demonstration - Samsung VP-D200i Owner's Instruction Book

ENGLISH ENGLISH
Advanced Recording
G

DEMONSTRATION

✤ Demonstration automatically shows you the major functions that are
included with your camcorder so that you may use them more
easily.
✤ The DEMONSTRATION function may only be used in the CAM
mode without a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the
DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
I
The menu list will appear.
3. Move the MENU SELECTOR to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and
push the MENU SELECTOR.
5. To activate the DEMONSTRATION,
set DEMONSTRATION ON.
I
Press the menu button to quit the menu.
I
The demonstration will begin.
6. To end the DEMONSTRATION,
set the DEMONSTRATION to OFF.
Notes
I
The DEMONSTRATION function only works without a
TAPE installed.
I
The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to the
CAM mode (no tape is inserted in the camcorder).
I
If you press other buttons (FADE, BLC, PHOTO, EASY) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily
and resumes 10 minutes later if you do not operate any other functions.
I
While setting the NIGHT CAPTURE to ON, the DEMONSTRATION
function does not work.
42
G
DEMONSTRATION
✤
✤ DEMONSTRATION
✤
1.
2.
CAM MODE
INITIAL CLOCK SET
CAMERA
WL. REMOTE
3.
A/V
BEEP SOUND
MEMORY
SHUT. SOUND
VIEWER
DEMO
4.
5.
CAM MODE
INITIAL SET
6.
CLOCK SET
WL.REMOTE
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION
I
I
I
DEMONSTRATION
FADE
DEMONSTRATION
10
I
NIGHT CAPTURE
DEMONSTRATION
DEMONSTRATION
OFF
CAM
MENU
I
MENU SELECTOR
INITIAL
DEMONSTRATION
MENU SELECTOR
DEMONSTRATION
DEMONSTRATION
I
MENU
I
DEMONSTRATION
DEMONSTRATION
OFF
DEMONSTRATION
CAM
10 DEMONSTRATION
BLC PHOTO
DEMONSTRATION
ON
DEUTSCH
CAM
ON
EASY
42 42