Samsung VP-D200i Owner's Instruction Book page 105

ENGLISH ENGLISH
Troubleshooting
✤ If these instructions do not solve your problem, contact your nearest
Samsung authorized service centre.
Symptom
You cannot switch the
Check the battery pack or the AC Power Adapter.
camcorder on.
Check the POWER switch is set to CAM.
START/STOP button
does not operate while You have reached the end of the cassette.
recording. Check the record protection tab on the cassette.
You have left the camcorder set to STBY for more than 5
The camcorder goes off
minutes without using it.
automatically.
The battery pack is fully exhausted.
The atmospheric temperature is too low.
The battery pack is
The battery pack has not been charged fully.
quickly exhausted.
The battery pack is completely dead, and cannot be
recharged, Use another battery pack.
The video heads may be dirty.
When you see a blue
screen during playback.
Clean the head with a cleaning tape.
A vertical strip appears The contrast between the subject and the background is too
great for the camcorder to operate normally. Make the
on the screen when
background bright to reduce the contrast or use the BLC
recording a dark
background. function while you are recording brighter.
The Viewfinder lens has not been adjusted.
The image in the
Adjust the viewfinder control lever until the indicators
viewfinder is blurred.
displayed on the viewfinder come into sharp focus.
Auto focus does not Check the M.FOCUS menu.
work. Auto focus does not work in the Manual Focus mode.
Play, FF or REW button Check the POWER switch. Set the power switch to PLAYER.
does not work.
You have reached the beginning or end of the cassette.
This is normal operation and it is not a failure or defect.
When you see a broken
block image during the
RECORD SEARCH.
105 105
Explanation/Solution
✤
START/STOP /
POWER
PLAYER
RECORD SEARCH
/
CAM
BLC
5
105