Laminating; Cleaning - Swingline FUSION 1100L Start Here Manual

laminating

1 On the front of the laminator there are line indicators to help you feed your pouch accurately.
Using the indicators feed the sealed edge of the pouch, into the laminator. The laminator will
grip the pouch and guide it through.
2 Upon exiting remove your laminated item immediately and lay on a flat surface to ensure
optimal quality.
3 When you are finished laminating push the slider switch back to the '
Manual Release
NOTE: If the pouch does not appear at the back of the laminator or you have
mis-fed the pouch - press and hold the release button (indicated with
the ) and pull the pouch towards you out of the laminator.
Feed a cleaning card or sheet of paper through the laminator to clean
the rollers before continuing.
Intelligent Power Off
NOTE: For added safety and environmental reasons the laminator will automatically stop heating
after 30 minutes of activity. You will see a green and orange light to indicate this state.
Re-set to '

cleaning

m
WARNING: UNPLUG THIS PRODUCT BEFORE CLEANING THE EXTERIOR.
WIPE EXTERIOR ONLY WITH A DAMP CLOTH AND DO NOT USE
DETERGENTS OR SOLVENTS.
Regularly feed a cleaning card or sheet of paper through the laminator to clean
the rollers.
' before next usage.
' position and unplug.
F U S I O N 1 1 0 0 L 9 " & 1 2 " L A M I N A T O R S
™
English
7